Power Product Knowledge

Warranty period of Power products

The Warranty period for all products in the Power category is 2 years.
For more info, visit the website FAQ.

Power Bank Models

Note: the Weight in Dimensions refers to the Net weight of the product only.

Models	Important Information	Dimensions
Card Power Bank (Code: CR) Branding: Photo Printing Minimum Order 10 units Capacities: 2600mAh5000mAh Colours: (white) Lead Time: 8 working days	CR 2600 mAh - Non Flashbay design CR 5000 mAh - Flashbay design CR 2600 mAh is 7mm wide / CR 5000mAh is 13mm wide CR 2600 mAh has accessory options (MBPC, FA) CR 5000 mAh has no accessory option Comes with a micro USB, a 'lightning' adapter and a USB-C adapter.(See: Product Awareness) The USB-C is default inside the card body and the 'lightning' will be loosely packed with the USB charging cable. A red LED will blink while CR is charging and will stop once fully charged. Note: when CR 5000mAh is ordered with MBPC, the Micro-USB Charging Cable will not be packed in the box. MBPC is put in a poly bag with the charging cable CR Manual CR5000 Manual CR 2600 mAh Safety sheet CR 5000 mAh Safety sheet CR AU C-Tick certificate	Length: 96mm (3.78 inches) Width: 62mm (2.44 inches) Height: 7mm (0.28 inches) Weight: 60 grams (2.12 ounces) View Dimensional Diagram Branding Area designated by Photo Printing Area Front: 96mm X 62mm Area Back: 96mm X 62mm Default Packaging Your Power Bank , Lightning & USB-C Adapters, USB-A to USB-C Cable, User Manual, Kraft Card Box
Solar Card Power Bank (Code: SC) Branding: Photo Printing Minimum Order 10 units Capacities: 2600mAh Colours: (white) Lead Time: 8 working days	Large branding area on one side, Solar Panel on the other side Comes with a micro USB, a 'lightning' adapter and a USB-C adapter.(See: Product Awareness). Primarily it should be charged via a power socket, solar charging is just an additional way to charge if there is no power socket available and the sunlight is good. Charging simultaneously via power socket and solar panel will not increase the charging speed. Charging only via direct sunlight it should take about 20 hours under standard sunlight condition (radiation intensity 1000W/m2, atmospheric mass AM1.5). Shell and other components are made from new material and can be recycled. Battery is dangerous good and need special attention. Note: when SC is ordered with MBPC, the USB-C Charging Cable will not be packed in the box. MBPC is put in a poly bag with the charging cable. Solar Card Manual SC 2600mAh Safety sheet	Length: 96.4mm (3.8 inches) Width: 62.2mm (2.45 inches) Height: 9.3mm (0.37 inches) Weight: 77 grams (2.72 ounces) View Dimensional Diagram Branding Area designated by Photo Printing Area Front: 96mm X 62mm Default Packaging Your Power Bank , Lightning & USB-C Adapters, USB-C  Charging Cable, User Manual, Kraft Card Box
Element Power Bank (Code: ET) Branding: Screen Printing, Laser Engraving, Individual Naming Minimum Order 10 units Capacities: 2200mAh2600mAh3000mAh3350mAh Colours: (black, blue, green, yellow, orange, red, pink, white) Lead Time: 7 working days	The outer shell is aluminium When LED is pressed it shows the battery status Can be PANTONE matched (min. 250 units, standard lead time + 2 day) Branding on all 4 sides is possible with extra charge and longer lead time (always double check with Operations) Individual engraving is possible with extra charge Comes with a USB-A to USB-C cable Includes torch function (see product awareness) By default it comes with Carabiner (CB). Note: CB is not attached to the Power Bank, but is put in a plastic bag next to Power Bank in the Kraft Box If ordered with an accessory box, CB will be put in the foam cut out under the Power Bank Flashbay Exclusive Product (EU?) Element Manual ET 2200mAh Safety sheet ET 2600mAh Safety sheet ET 3000mAh Safety sheet ET 3350mAh Safety sheet ET AU C-Tick certificate	Length: 104mm (4.09 inches) Width: 23mm (0.91 inches) Height: 23mm (0.91 inches) Weight: 79 grams (2.79 ounces) View Dimensional Diagram Branding Area designated by Screen Printing Area Front: 80mm X 13mm Area Back: 80mm X 13mm Laser Engraving Area Front: 75mm X 13mm Area Back: 75mm X 13mm Default Packaging Your Power Bank , USB-A to USB-C Cable, User Manual, Kraft Card Box
Core Power Bank (Code: CO) Branding: Photo Printing, Screen Printing Minimum Order 10 units Capacities: 2200mAh2600mAh3000mAh3350mAh Colours: (black, blue, green, yellow, orange, red, pink, white) Lead Time: 7 working days	When LED is pressed it shows the battery status Can be PANTONE matched (min. 250 units, standard lead time + 2 day) PANTONE matching is possible for the the body of the products, the sides are always white Comes with a USB-A to USB-C cable Includes torch function (see product awareness) The plastic parts are made with GRS Certified recycled plastic By default it comes with Carabiner (CB). Note: CB is not attached to the Power Bank, but is put in a plastic bag next to Power Bank in the Kraft Box If ordered with an accessory box, CB will be put in the foam cut out under the Power Bank Flashbay Exclusive Product (EU?) Core Manual CO 2200mAh Safety sheet CO 2600mAh Safety sheet CO 3000mAh Safety sheet CO 3350mAh Safety sheet CO AU C-Tick certificate	Length: 104mm (4.09 inches) Width: 25mm (0.98 inches) Height: 25mm (0.98 inches) Weight: 72 grams (2.54 ounces) View Dimensional Diagram Branding Area designated by Screen Printing Area Front: 80mm X 12mm Area Back: 80mm X 12mm Photo Printing Area Front: 80mm X 12mm Area Back: 80mm X 12mm Default Packaging Your Power Bank , USB-A to USB-C Cable, User Manual, Kraft Card Box
Maple Power Bank (Code: MP) Branding: Screen Printing, Laser Engraving, Individual Naming Minimum Order 10 units Capacities: 2200mAh2600mAh3000mAh3350mAh Colours: (white) Lead Time: 7 working days	The wood in this product is FSC certified so harvested from responsibly managed and sustainable forests worldwide (Note: there is one FSC certificate covering all products, there are no individual FSC product certificates) Branding on all 4 sides is possible with extra charge and longer lead time (always double check with Operations) Individual engraving is possible with extra charge Comes with a USB-A to USB-C cable Includes torch function (see product awareness) Flashbay Exclusive Product (EU?) Maple Manual MP 2200mAh Safety sheet MP 2600mAh Safety sheet MP 3000mAh Safety sheet MP 3350mAh Safety sheet MP AU C-Tick certificate	Length: 96mm (3.78 inches) Width: 25mm (0.98 inches) Height: 25mm (0.98 inches) Weight: 75 grams (2.65 ounces) View Dimensional Diagram Branding Area designated by Screen Printing Area Front: 80mm X 17mm Area Back: 80mm X 17mm Laser Engraving Area Front: 80mm X 15mm Area Back: 80mm X 15mm Default Packaging Your Power Bank , USB-A to USB-C Cable, User Manual, Kraft Card Box
Maple Christmas Power Bank (Code: MP_SCE) Branding: Screen Printing, Laser Engraving Minimum Order 10 units Capacities: 2200mAh2600mAh3000mAh3350mAh Colours: (white) Lead Time: 10 working days	The wood in this product is FSC certified so harvested from responsibly managed and sustainable forests worldwide (Note: there is one FSC certificate covering all products, there are no individual FSC product certificates) Possible 4 Christmas themed design to choose from Individual engraving is possible with extra charge Comes with a USB-A to USB-C cable Includes torch function (see product awareness) Flashbay Exclusive Product (EU?) Maple Manual MP 2200mAh Safety sheet MP 2600mAh Safety sheet MP 3000mAh Safety sheet MP 3350mAh Safety sheet MP AU C-Tick certificate	Length: 96mm (3.78 inches) Width: 25mm (0.98 inches) Height: 25mm (0.98 inches) Weight: 71 grams (2.5 ounces) View Dimensional Diagram Branding Area designated by Screen Printing Area Front: 80mm X 17mm Area Back: 80mm X 17mm Laser Engraving Area Front: 80mm X 15mm Area Back: 80mm X 15mm Default Packaging Your Power Bank , Micro-USB  Charging Cable, User Manual, Kraft Card Box
Lux Power Bank (Code: LX) Branding: Screen Printing, Embossing Minimum Order 10 units Capacities: 2200mAh2600mAh3000mAh3350mAh Colours: (black, white, brown) Lead Time: 7 working days	When LED is pressed it shows the battery status Comes with a USB-A to USB-C cable Includes torch function (see product awareness) Flashbay Exclusive Product (EU?) NOTE: branding area of SPR and EMB is different Lux Manual LX 2200mAh Safety sheet LX 2600mAh Safety sheet LX 3000mAh Safety sheet LX 3350mAh Safety sheet LX AU C-Tick certificate	Length: 95mm (3.74 inches) Width: 25mm (0.98 inches) Height: 25mm (0.98 inches) Weight: 84 grams (2.96 ounces) View Dimensional Diagram Branding Area designated by Screen Printing Area Front: 77mm X 12mm Area Back: 77mm X 12mm Embossing Area Front: 45mm X 10mm Area Back: 45mm X 10mm Default Packaging Your Power Bank , USB-A to USB-C Cable, User Manual, Kraft Card Box
Volt Power Bank (Code: VT) Branding: Screen Printing, Laser Engraving, Individual Naming Minimum Order 10 units Capacities: 2600mAh Colours: (black, white, hybrid) Lead Time: 7 working days	Comes with a micro USB, a 'lightning' adapter, a USB-C adapter.(See: Product Awareness) and also with a micro-USB charging cable The USB-C is default inside the card body and the 'lightning' will be loosely packed with the USB-C charging cable." Available in Black and White Flashbay Exclusive Product (EU?) Volt Manual VT 2600 mAh Safety sheet ] Volt AU C-Tick certificate	Length: 96.6mm (3.8 inches) Width: 62.5mm (2.46 inches) Height: 8mm (0.31 inches) Weight: 73 grams (2.57 ounces) View Dimensional Diagram Branding Area designated by Screen Printing Area Front: 90mm X 48mm Area Back: 90mm X 48mm Laser Engraving Area Front: 80mm X 48mm Area Back: 80mm X 48mm Default Packaging Your Power Bank , Lightning & USB-C Adapters, USB-A to USB-C Cable, User Manual, Kraft Card Box
Tour Power Bank (Code: TR) Branding: Screen Printing Minimum Order 10 units Capacities: 2600mAh Colours: (black, white, brown) Lead Time: 7 working days	Comes with a micro USB, a 'lightning' adapter, a USB-C adapter.(See: Product Awareness) and also with a micro-USB charging cable The USB-C is default inside the card body and the 'lightning' will be loosely packed with the USB-C charging cable." Available in Black, Brown and White Flashbay Exclusive Product (EU?) Tour Manual TR 2600 mAh Safety sheet TR AU C-Tick certificate	Length: 96mm (3.78 inches) Width: 8mm (0.31 inches) Height: 62mm (2.44 inches) Weight: 65 grams (2.29 ounces) View Dimensional Diagram Branding Area designated by Screen Printing Area Front: 85mm X 50mm Area Back: 85mm X 50mm Default Packaging Your Power Bank , Lightning & USB-C Adapters, USB-C  Charging Cable, User Manual, Kraft Card Box
Encore Power Bank (Code: EC) Branding: Screen Printing, Laser Engraving, Individual Naming Minimum Order 10 units Capacities: 5200mAh6000mAh6700mAh Colours: (black, blue, green, yellow, orange, red, pink, white) Lead Time: 7 working days	When LED is pressed it shows the battery status Comes with USB-A to USB-C Cable Can be PANTONE matched (min. 250 units, standard lead time + 2 day) Flashbay Exclusive Product (EU?) By default it comes with Carabiner (CB). Note: CB is not attached to the Power Bank, but is put in a plastic bag next to Power Bank in the Kraft Box If ordered with an accessory box, CB will be put in the foam cut out under the Power Bank Encore Manual EC 5200mAh Safety sheet EC 6000mAh Safety sheet EC 6700mAh Safety sheet EC AU C-Tick certificate	Length: 102mm (4.02 inches) Width: 24mm (0.94 inches) Height: 46mm (1.81 inches) Weight: 145 grams (5.11 ounces) View Dimensional Diagram Branding Area designated by Screen Printing Area Front: 85mm X 30mm Area Back: 85mm X 30mm Laser Engraving Area Front: 65mm X 30mm Area Back: 65mm X 30mm Default Packaging Your Power Bank , USB-A to USB-C Cable, User Manual, Kraft Card Box
Rex Power Bank (Code: RX) Branding: Screen Printing, Laser Engraving, Individual Naming Minimum Order 10 units Capacities: 7800mAh10050mAh Colours: (black, blue, green, yellow, orange, red, pink, white) Lead Time: 7 working days	Comes with USB-A to USB-C Cable Includes Torch Function Can be PANTONE matched (min. 250 units, standard lead time + 2 day) Available with GCS Flashbay Exclusive Product (EU?) Note: when ordered with THC in GCS, THC will be packed separately and not inside GCS. Rex Manual RX 7800mAh Safety Sheet RX 10050mAh Safety Sheet RX AU C-Tick certificate	Length: 94mm (3.7 inches) Width: 24mm (0.94 inches) Height: 65mm (2.56 inches) Weight: 200 grams (7.05 ounces) View Dimensional Diagram Branding Area designated by Screen Printing Area Front: 80mm X 45mm Area Back: 80mm X 45mm Laser Engraving Area Front: 80mm X 45mm Area Back: 80mm X 45mm Default Packaging Your Power Bank , USB-A to USB-C Cable, User Manual, Kraft Card Box
Titan Power Bank (Code: TN) Branding: Screen Printing, Laser Engraving, Individual Naming Minimum Order 10 units Capacities: 15600mAh20100mAh Colours: (black, blue, green, yellow, orange, red, pink, white) Lead Time: 8 working days	Comes with USB-A to USB-C Cable Flashbay Exclusive Product (EU?) Can charge 2 device at the same time for more see Power FAQ Includes Torch Function Can be PANTONE matched (min. 250 units, standard lead time + 2 day) Available with GCLO Titan Manual TN 15600mAh Safety Sheet TN 20100mAh Safety Sheet TN AU C-Tick certificate	Length: 170mm (6.69 inches) Width: 65mm (2.56 inches) Height: 24.5mm (0.96 inches) Weight: 412 grams (14.53 ounces) View Dimensional Diagram Branding Area designated by Screen Printing Area Front: 150mm X 45mm Area Back: 150mm X 45mm Laser Engraving Area Front: 80mm X 45mm Area Back: 80mm X 45mm Default Packaging Your Power Bank , USB-A to USB-C Cable, User Manual, Kraft Card Box
Big Boost Power Bank (Code: BB) Branding: Photo Printing Minimum Order 10 units Capacities: 4400mAh6600mAh10050mAh Colours: (black, blue, green, yellow, orange, red, pink, white) Lead Time: 8 working days	Comes with Micro-USB cable Can be PANTONE matched (min. 250 units, standard lead time + 2 day) Comes with USB-C and Lightning Adapter Flashbay Exclusive Product Note: product can NOT be used to transfer data from one device to another BB 4400mAh Safety Data Sheet Report BB 6600mAhSafety Data Sheet Report BB 10050mAh Safety Data Sheet Report Big Boost Manual BB AU C-Tick certificate	Length: 90mm (3.54 inches) Width: 90mm (3.54 inches) Height: 25mm (0.98 inches) Weight: 201.5 grams (7.11 ounces) View Dimensional Diagram Branding Area designated by Branding Area Area Front: 70mm X 70mm Area Back: 70mm X 70mm Default Packaging Your Power Bank , Lightning & USB-C Adapters, User Manual, Kraft Card Box
Force Power Bank (Code: FE) Branding: Photo Printing, Screen Printing Minimum Order 25 units Capacities: 5000mAh Colours: (black, white, hybrid) Lead Time: 10 working days	Comes with USB-A to USB-C Cable The Force Power Bank can magnetically attach and wirelessly charge MagSafe® compatible phones.It can also act as a standard Power Bank for non MagSafe® phones Compatible with MagSafe® phone cases Output over-current and over-voltage protection Input over-current and over-voltage protection High temperature shut down Short-circuit protection Electrostatic Discharge (ESD) protection Force User Manual	Length: 64mm (2.52 inches) Width: 96mm (3.78 inches) Height: 15mm (0.59 inches) Weight: 135 grams (4.76 ounces) View Dimensional Diagram Branding Area designated by Screen Printing Area Front: Φ42mm Area Bottom: 64mm X 16mm Area Back: 45.5mm X 77.5mm Photo Printing Area Front: Φ42mm Area Bottom: 64mm X 16mm Area Back: 45.5mm X 77.5mm Default Packaging Your Power Bank , USB-A to USB-C Cable, User Manual, Kraft Card Box

USB Car Chargers

Note: the Weight in Dimensions refers to the Net weight of the product only.

Models	Important Information	Dimensions
Zip USB Car Charger (Code: zp) Branding: Screen Printing, Laser Engraving, Individual Naming Minimum Order 10 units Colours: (black, white) Lead Time: 6 working days	Zip Car Charger Flashbay Exclusive Product Branding method is SPR and ENL Metallic Face 2 USB ports allow 2 devices to be charged at the same time Input:12V/24V, Output: 5V, 2.1A There is no battery inside the product LED is always on when in use (white light). Zip Manual MA/VX/ZP/WD AU C-Tick certificate	Weight: 40 grams (1.41 ounces) View Dimensional Diagram Branding Area designated by Branding Area Area Top: 27mm X 19mm Default Packaging Your USB Car Charger, User Manual, Kraft Card Box
Vista USB Car Charger (Code: vs) Branding: Photo Printing Minimum Order 10 units Colours: (black, blue, green, yellow, orange, red, pink, white) Lead Time: 6 working days	Vista Car Charger Flashbay Exclusive Product Plastic Face Branding method is DPR 2 USB ports allow 2 devices to be charged at the same time Input:12V/24V, Output: 5V, 2.1A There is no battery inside the product LED is always on when in use (colour depends on the product colour). Vista Manual MA/VX/ZP/WD AU C-Tick certificate	Length: 65mm (2.56 inches) Width: 25mm (0.98 inches) Height: 33mm (1.3 inches) Weight: 36 grams (1.27 ounces) View Dimensional Diagram Branding Area designated by Photo Printing Area Top: 30mm X 22mm Default Packaging Your USB Car Charger, User Manual, Kraft Card Box

Wireless Chargers

Note: the Weight in Dimensions refers to the Net weight of the product only.

Models	Important Information	Dimensions
Ring Wireless Charger (Code: RG) Branding: Photo Printing, Laser Engraving, Individual Naming Minimum Order 10 units Colours: (bamboo_wood) Lead Time: 6 working days	Branding method is Photo Printing and Laser Engraving The bamboo used in this product is FSC-certified bamboo wood Individual Naming is possible with extra charge There is no battery inside the product Wireless charger can output 5V/1A=5W, 7.5V/1A=7.5W and 9V/1.11A=10W in one product 10W is the maximum capability of the charger, the phone model would determine the maximum power output as some phone models can only support 5W charging To plug into a power socket: No special requirement for phones that support 5W or less wireless charging For phones that support 7.5W or above wireless charging, 5V/2A output adapter is needed to support 5W/7.5W wireless charging For phones that support 10W wireless charging, a 9V/2A output adapter is needed to achieve 10W wireless charging To plug into a laptop/ computer: Customer's laptop USB port would determine the maximum output of the wireless charger USB 2.0 port --> 5V/0.5A=2.5W USB 3.0 port --> 5V/0.9A=4.5W Not recommended to plug into a laptop with USB2.0 or USB3.0 port due to possible overload USB 3.1 Gen2 port --> 5V/1.5A, 12V/2A, 20V/5A=10W Due to the natural material ENL wont have the same affect on all units, see below Ring Manual CQ/ED AU C-Tick certificate Ring Material Composition Sheet LED Behaviour	Height: 8mm (0.31 inches) Diameter: 76mm (2.99 inches) Weight: 59 grams (2.08 ounces) View Dimensional Diagram Branding Area designated by Photo Printing Area Top: Φ62mm Laser Engraving Area Top: Φ62mm Default Packaging Your Wireless Charger, USB-A to USB-C Cable, User Manual, Kraft Card Box
Savanna Wireless Charger (Code: SV) Branding: Photo Printing, Laser Engraving, Individual Naming Minimum Order 10 units Colours: (bamboo_wood) Lead Time: 6 working days	Branding method is Photo Printing and Laser Engraving The bamboo used in this product is FSC-certified bamboo wood Individual Naming is possible with extra charge There is no battery inside the product Wireless charger can output 5V/1A=5W, 7.5V/1A=7.5W and 9V/1.11A=10W in one product 10W is the maximum capability of the charger, the phone model would determine the maximum power output as some phone models can only support 5W charging To plug into a power socket: No special requirement for phones that support 5W or less wireless charging For phones that support 7.5W or above wireless charging, 5V/2A output adapter is needed to support 5W/7.5W wireless charging For phones that support 10W wireless charging, a 9V/2A output adapter is needed to achieve 10W wireless charging To plug into a laptop/ computer: Customer's laptop USB port would determine the maximum output of the wireless charger USB 2.0 port --> 5V/0.5A=2.5W USB 3.0 port --> 5V/0.9A=4.5W Not recommended to plug into a laptop with USB2.0 or USB3.0 port due to possible overload USB 3.1 Gen2 port --> 5V/1.5A, 12V/2A, 20V/5A=10W Due to the natural material ENL wont have the same affect on all units, see below Savanna Manual CQ/ED AU C-Tick certificate Savanna Material Composition Sheet LED Behaviour	Length: 76mm (2.99 inches) Width: 76mm (2.99 inches) Height: 8mm (0.31 inches) Weight: 70 grams (2.47 ounces) View Dimensional Diagram Branding Area designated by Photo Printing Area Top: 62mm X 62mm Laser Engraving Area Top: 62mm X 62mm Default Packaging Your Wireless Charger, USB-A to USB-C Cable, User Manual, Kraft Card Box
Edge Wireless Charger (Code: ED) Branding: Photo Printing Minimum Order 10 units Colours: (silver) Lead Time: 6 working days	Branding method is Photo Printing There is no battery inside the product Wireless charger can output 5V/1A=5W, 7.5V/1A=7.5W and 9V/1.11A=10W in one product 10W is the maximum capability of the charger, the phone model would determine the maximum power output as some phone models can only support 5W charging To plug into a power socket: No special requirement for phones that support 5W or less wireless charging For phones that support 7.5W or above wireless charging, 5V/2A output adapter is needed to support 5W/7.5W wireless charging For phones that support 10W wireless charging, a 9V/2A output adapter is needed to achieve 10W wireless charging To plug into a laptop/ computer: Customer's laptop USB port would determine the maximum output of the wireless charger USB 2.0 port --> 5V/0.5A=2.5W USB 3.0 port --> 5V/0.9A=4.5W Not recommended to plug into a laptop with USB2.0 or USB3.0 port due to possible overload USB 3.1 Gen2 port --> 5V/1.5A, 12V/2A, 20V/5A=10W Edge Manual CQ/ED AU C-Tick certificate Edge Material Composition Sheet LED Behaviour	Length: 76mm (2.99 inches) Width: 76mm (2.99 inches) Height: 7mm (0.28 inches) Weight: 69 grams (2.43 ounces) View Dimensional Diagram Branding Area designated by Branding Area Area Top: 74mm X 74mm Default Packaging Your Wireless Charger, USB-A to USB-C Cable, User Manual, Kraft Card Box
Cirque Wireless Charger (Code: CQ) Branding: Photo Printing Minimum Order 10 units Colours: (silver) Lead Time: 6 working days	Branding method is Photo Printing There is no battery inside the product Wireless charger can output 5V/1A=5W, 7.5V/1A=7.5W and 9V/1.11A=10W in one product 10W is the maximum capability of the charger, the phone model would determine the maximum power output as some phone models can only support 5W charging To plug into a power socket: No special requirement for phones that support 5W or less wireless charging For phones that support 7.5W or above wireless charging, 5V/2A output adapter is needed to support 5W/7.5W wireless charging For phones that support 10W wireless charging, a 9V/2A output adapter is needed to achieve 10W wireless charging To plug into a laptop/ computer: Customer's laptop USB port would determine the maximum output of the wireless charger USB 2.0 port --> 5V/0.5A=2.5W USB 3.0 port --> 5V/0.9A=4.5W Not recommended to plug into a laptop with USB2.0 or USB3.0 port due to possible overload USB 3.1 Gen2 port --> 5V/1.5A, 12V/2A, 20V/5A=10W Cirque Manual CQ/ED AU C-Tick certificate Cirque Material Composition Sheet LED Behaviour	Height: 7mm (0.28 inches) Diameter: 76mm (2.99 inches) Weight: 59 grams (2.08 ounces) View Dimensional Diagram Branding Area designated by Branding Area Area Top: Φ74mm Default Packaging Your Wireless Charger, USB-A to USB-C Cable, User Manual, Kraft Card Box
Forest Wireless Charger (Code: FR) Branding: Screen Printing, Laser Engraving, Individual Naming Minimum Order 10 units Colours: (lightwood) Lead Time: 6 working days	The wood in this product is FSC certified so harvested from responsibly managed and sustainable forests worldwide (Note: there is one FSC certificate covering all products, there are no individual FSC product certificates) Branding method is Screen Printing and Laser Engraving There is no battery inside the product Wireless charger can output 5V/1A=5W, 7.5V/1A=7.5W and 9V/1.11A=10W in one product 10W is the maximum capability of the charger, the phone model would determine the maximum power output as some phone models can only support 5W charging To plug into a power socket: No special requirement for phones that support 5W or less wireless charging For phones that support 7.5W or above wireless charging, 5V/2A output adapter is needed to support 5W/7.5W wireless charging For phones that support 10W wireless charging, a 9V/2A output adapter is needed to achieve 10W wireless charging To plug into a laptop/ computer: Customer's laptop USB port would determine the maximum output of the wireless charger USB 2.0 port --> 5V/0.5A=2.5W USB 3.0 port --> 5V/0.9A=4.5W Not recommended to plug into a laptop with USB2.0 or USB3.0 port due to possible overload USB 3.1 Gen2 port --> 5V/1.5A, 12V/2A, 20V/5A=10W Forest Manual FR AU C-Tick certificate Forest Material Composition Sheet LED Behaviour	Length: 90mm (3.54 inches) Width: 90mm (3.54 inches) Height: 9.7mm (0.38 inches) Weight: 70 grams (2.47 ounces) View Dimensional Diagram Branding Area designated by Screen Printing Area Top: 78mm X 78mm Laser Engraving Area Top: 70mm X 70mm Default Packaging Your Wireless Charger, USB-A to USB-C Cable, User Manual, Kraft Card Box
Forest Christmas Wireless Charger (Code: FR_SCE) Branding: Screen Printing, Laser Engraving Minimum Order 10 units Colours: (lightwood) Lead Time: 6 working days	The wood in this product is FSC certified so harvested from responsibly managed and sustainable forests worldwide (Note: there is one FSC certificate covering all products, there are no individual FSC product certificates) Branding method is Screen Printing and Laser Engraving Possible 4 Christmas themed design to choose from There is no battery inside the product Wireless charger can output 5V/1A=5W, 7.5V/1A=7.5W and 9V/1.11A=10W in one product 10W is the maximum capability of the charger, the phone model would determine the maximum power output as some phone models can only support 5W charging To plug into a power socket: No special requirement for phones that support 5W or less wireless charging For phones that support 7.5W or above wireless charging, 5V/2A output adapter is needed to support 5W/7.5W wireless charging For phones that support 10W wireless charging, a 9V/2A output adapter is needed to achieve 10W wireless charging To plug into a laptop/ computer: Customer's laptop USB port would determine the maximum output of the wireless charger USB 2.0 port --> 5V/0.5A=2.5W USB 3.0 port --> 5V/0.9A=4.5W Not recommended to plug into a laptop with USB2.0 or USB3.0 port due to possible overload USB 3.1 Gen2 port --> 5V/1.5A, 12V/2A, 20V/5A=10W Forest Manual FR AU C-Tick certificate Forest Material Composition Sheet LED Behaviour	Length: 90mm (3.54 inches) Width: 90mm (3.54 inches) Height: 9.7mm (0.38 inches) Weight: 70 grams (2.47 ounces) View Dimensional Diagram Branding Area designated by Screen Printing Area Top: Φ40mm Area Bottom: 70mm X 50mm Laser Engraving Area Top: 70mm X 46mm Area Bottom: Φ50mm Default Packaging Your Wireless Charger, USB-C  Charging Cable, User Manual, Kraft Card Box
Loop Wireless Charger (Code: LP) Branding: Screen Printing, Laser Engraving, Individual Naming Minimum Order 10 units Colours: (black, blue, green, yellow, orange, red, pink, white, hybrid) Lead Time: 6 working days	Loop Wireless Charger Branding method is Screen Printing, Laser Engraving There is no battery inside the product Wireless charger can output 5V/1A=5W, 7.5V/1A=7.5W and 9V/1.11A=10W in one product 10W is the maximum capability of the charger, the phone model would determine the maximum power output as some phone models can only support 5W charging To plug into a power socket: No special requirement for phones that support 5W or less wireless charging For phones that support 7.5W or above wireless charging, 5V/2A output adapter is needed to support 5W/7.5W wireless charging For phones that support 10W wireless charging, a 9V/2A output adapter is needed to achieve 10W wireless charging To plug into a laptop/ computer: Customer's laptop USB port would determine the maximum output of the wireless charger USB 2.0 port --> 5V/0.5A=2.5W USB 3.0 port --> 5V/0.9A=4.5W Not recommended to plug into a laptop with USB2.0 or USB3.0 port due to possible overload USB 3.1 Gen2 port --> 5V/1.5A, 12V/2A, 20V/5A=10W Loop Manual AU C-Tick certificate Loop Material Composition Sheet LED Behaviour	Height: 7.3mm (0.29 inches) Diameter: 90mm (3.54 inches) Weight: 55 grams (1.94 ounces) View Dimensional Diagram Branding Area designated by Screen Printing Area Top: Φ65mm Laser Engraving Area Top: Φ65mm Default Packaging Your Wireless Charger, USB-A to USB-C Cable, User Manual, Kraft Card Box
Stand Wireless Charger (Code: SA) Branding: Photo Printing Minimum Order 10 units Colours: (black, white) Lead Time: 6 working days	Phone stand and Wireless Charger Branding method is Digital Print There is no battery inside the product Note: product can be used horizontally and vertically (see Product Awareness) Material: plastic and additional metal stand; Outputs 5W of wireless charging power. Dimensions of card box packaging is: 80mm x 150mm x 25mm or 270mm x 220mm x 200mm depending on order size Wireless charger can output 5V/1A=5W, 7.5V/1A=7.5W and 9V/1.11A=10W in one product 10W is the maximum capability of the charger, the phone model would determine the maximum power output as some phone models can only support 5W charging To plug into a power socket: No special requirement for phones that support 5W or less wireless charging For phones that support 7.5W or above wireless charging, 5V/2A output adapter is needed to support 5W/7.5W wireless charging For phones that support 10W wireless charging, a 9V/2A output adapter is needed to achieve 10W wireless charging To plug into a laptop/ computer: Customer's laptop USB port would determine the maximum output of the wireless charger USB 2.0 port --> 5V/0.5A=2.5W USB 3.0 port --> 5V/0.9A=4.5W Not recommended to plug into a laptop with USB2.0 or USB3.0 port due to possible overload USB 3.1 Gen2 port --> 5V/1.5A, 12V/2A, 20V/5A=10W Stand Manual SA AU C-Tick certificate Stand Material Composition Sheet LED Behaviour	Length: 145mm (5.71 inches) Width: 76mm (2.99 inches) Height: 11mm (0.43 inches) Weight: 116.5 grams (4.11 ounces) View Dimensional Diagram Branding Area designated by Photo Printing Area Top: 72mm X 141mm Default Packaging Your Wireless Charger, USB-A to USB-C Cable, User Manual, Kraft Card Box
EcoDesk Wireless Charger (Code: ECD) Branding: Screen Printing, Laser Engraving, Individual Naming Minimum Order 10 units Colours: (bamboo_wood) Lead Time: 7 working days	Wireless Charger and desk organizer Comes with 1m 2A USB-C Cable Branding method is Screen Print (SPR) and Laser Engraving (ENL) There are 3 different Branding Area options, see here There is no battery inside the product Material: New Bamboo Wood, can be recycled The product is FSC certified so harvested from responsibly managed and sustainable forests worldwide 'Due to the natural material ENL wont have the same affect on all units Outputs 5W of wireless charging power. Dimensions of card box packaging is: 131mm x 14mm x 250m Wireless charger can output 5V/1A=5W, 7.5V/1A=7.5W and 9V/1.11A=10W in one product 10W is the maximum capability of the charger, the phone model would determine the maximum power output as some phone models can only support 5W charging To plug into a power socket: No special requirement for phones that support 5W or less wireless charging For phones that support 7.5W or above wireless charging, 5V/2A output adapter is needed to support 5W/7.5W wireless charging For phones that support 10W wireless charging, a 9V/2A output adapter is needed to achieve 10W wireless charging To plug into a laptop/ computer: Customer's laptop USB port would determine the maximum output of the wireless charger USB 2.0 port --> 5V/0.5A=2.5W USB 3.0 port --> 5V/0.9A=4.5W Not recommended to plug into a laptop with USB2.0 or USB3.0 port due to possible overload USB 3.1 Gen2 port --> 5V/1.5A, 12V/2A, 20V/5A=10W Cable will likely disconnect if used with a different product other than the Wireless charger EcoDesk Material Composition Sheet LED Behaviour EcoDesk Manual	Length: 248mm (9.76 inches) Width: 125mm (4.92 inches) Height: 12mm (0.47 inches) Weight: 170 grams (6 ounces) View Dimensional Diagram Branding Area designated by Screen Printing Area Left: 65mm X 15.5mm Laser Engraving Area Left: 55mm X 13mm Area Right: 100mm X 13mm Area Bottom: 100mm X 75mm Default Packaging Your Wireless Charger, USB-A to USB-C Cable, User Manual, Kraft Card Box

Extras, Accessories, Upgrades for Power Products

Models	Important Information	Dimensions
Presentation Tin Extra Large (Code: PTXL) Branding: Laser Engraving, Screen Printing Colours: (silver) Lead Time: 5 working days	4 Colour Screen Print (standard lead time of 8 days) Print area is different for SPR and ENL Dimensions: 44mm x 45,2mm x 121,2mm Packed in individual plant based bags Made of Tinplate Fulfilment of special request of PTXL only order (without main product) is not possible	Weight: 55.000 grams (1.94 ounces) Show Print Area
Magnet Box Extra Large (Code: MBXL) Branding: Screen Printing Colours: (white) Lead Time: 5 working days	4 Colour Screen Print (standard lead time of 8 days) Packed in individual plant based bags Dimensions: 44mm x 43,7mm x 120mm	Weight: 33.000 grams (1.16 ounces) Show Print Area
Carabiner (Code: CB) Branding: Colours: (silver) Lead Time: 5 working days	The carabiner is made of Aluminium alloy Orders are delivered without attaching CB to the Power bank	Weight: 4.960 grams (0.17 ounces)
Neckstrap (Code: NS) Branding: Colours: (black, blue, green, yellow, orange, red, pink, white) Lead Time: 5 working days	Comes with a Safety buckle Standard lead time of 6 working days No branding option available Can be PANTONE matched (10 working day lead time) Note: Safety buckle of PANTONE matched NS is black. Orders are delivered without attaching NS to the Power bank	Weight: 4.960 grams (0.17 ounces)
Printable Neckstrap (Code: PNS) Branding: Screen Printing Colours: (black, blue, green, yellow, orange, red, pink, white) Lead Time: 7 working days	4 Colour Screen Print Comes with a Safety buckle 6 working days lead time for standard color PNS without print Temporary lead time increase: 8 working days lead time with Screen Print Can be PANTONE matched (10 working days lead time for both with or without Screen print) Note: Safety buckle of PANTONE matched PNS is black. Available with CO,ET, FT Orders are delivered without attaching PNS to the Power bank	Weight: 4.960 grams (0.17 ounces) Print Area: Area Front: 500x10mm Show Print Area
Triple Head Cable Upgrade (Code: THC) Branding: Colours: (silver) Lead Time: 5 working days	Provides connectivity to Android (Micro-B), Apple (Lightning) and USB-C devices alike Triple Head Cable (THC) is an upgrade If customer orders they will receive only THC with their PBs, as the standard cable will be replaced with THC To use the Lightning or the USB-C connector first the Lightning/ USB-C connector should be attached to the Micro-B connector in order to get power. This is shown on the 'flag' that is attached to the THC.	Weight: 18.000 grams (0.63 ounces)
Fabric Bag (Code: FA) Branding: Colours: (black) Lead Time: 5 working days	Case for Power Banks Made from protective mesh fabric Fabric bag (FA) is made of 100% polyester. Drawstring mechanism at the top of the Fabric Bag ensures Power Bank is securely enclosed at all times	Weight: 5.000 grams (0.18 ounces)
Magnet Box Power Bank Card (Code: MBPC) Branding: Screen Printing Colours: (white) Lead Time: 5 working days	Accessory for the Card Power Banks User manual is positioned under the Power bank in the box Packed in a plant based bag and then put into brown carton box (25pcs/50pcs) Fastened with a secure magnetic clasp SC and CR5000: The lightning adapters will be placed underneath the SC inside the MBPC, and the standard USB-C charging cable will be placed separately, but inside the same individual plant based bag. Please refer to the below image. CR2600/VT/TR: The default charging cable and lightning adapters will be packed inside the MBPC. Carabiner (only SC can have carabiner as an accessory among card power banks) will be packed unattached inside the MBPC Dimension: 70,6mm 20,2mm x 105mm	Weight: 16.050 grams (0.57 ounces)
Magnet Box Square (Code: MBSQ) Branding: Screen Printing Colours: (white) Lead Time: 5 working days	Accessory for Car chargers and some Audio products. Semi-transparent. Sturdy exterior shell. Closes magnetically. Available for Screen Printing in 4 colours. SPR area: 48mm x 48mm. Dimensions: 68mm x 62,5mm x 53mm	Weight: 25.000 grams (0.88 ounces)
Magnet Box Large (Code: MBPL) Branding: Screen Printing Colours: (white) Lead Time: 5 working days	Semi-transparent. Sturdy exterior shell. Closes magnetically. Available for Screen Printing in 4 colours. SPR area: 86mm x 33.5mm. Dimensions: 54,5mm x 107mm x 45,2mm	Weight: 25.000 grams (0.88 ounces)
Gift Case Small (Code: GCS) Branding: Laser Engraving, Screen Printing Colours: (white, black) Lead Time: 10 working days	Case is for the Rex (RX) Power Bank Note: when Rex (RX) is ordered with THC in GCS, THC will be packed separately and not inside GCS. Dedicated branding plate. Sales are encouraged to sell GCS with logo branding (and must charge the usual set up fee). Closes with a zip. Can be SPR or ENL. Branding area: 55mm x 25mm.	Weight: 76.000 grams (2.68 ounces)
Magnet Box (Code: MBIC) Branding: Screen Printing Colours: (white) Lead Time: 5 working days	Available for some Wireless chargers (please check Price List) Closes magnetically Sturdy exterior shell Available for Screen Printing in 4 colours SPR area is 70mm x 70mm Dimensions: 99mm x 95mm x 25mm Packed in individual plant based bags	Weight: 43.000 grams (1.52 ounces)
Pre Production Working Sample (Code: PPWS, but has to be specified individually in Netsuite)	Has to be specified in Netsuite like a normal order, but with just 1 unit E.g. ET.2200mAh.BLACK - 1 unit - PPWS price from our price list Standard lead time Pantone matched shell is not possible How to find PPWS on our price list? -> The Price List Tool

Services for Power Products

Services	Important Information	Additional information
Pantone® Colour Matching (Code: P) Lead Time: Normally there is no additional lead time for this service	Has to be specified as Model.Capacity.CUSTOM (e.g. CO.3350mAh.CUSTOM) Minimum quantity for Pantone® Colour Matching is 250 Customer requires a Pantone® Colour Matching shell. There is a small additional setup charge for this service. If the product ordered has a translucent shell, the colour of the product may appear to change depending on the lighting conditions Only Pantone® colour references will be accepted to reference colours (CMYK references cannot be used)
Power bank Air Freight Shipping Service - European Customer only	Customers that ordered Power banks and would like to ship it to their clients/ customers can use our Air Freight Shipping Service. This service is available for European customers only. Shipping can be any country to which DHL and UPS have Dangerous Goods Shipment. Customers that purchase Power banks will find the below note along with the goods inside the parcel and they will contact you as their Sales Account Manager to arrange for the Air Fright shipping. FLASHBAY DGSS
Print Plate (Code: PL)	More than 4 colours to be printed on an item. Quantity 1 for extra screen print colour
Individual Naming (Code: IN)	Unique name or serial number can be engraved on products where branding method is ENL Excel list of individual names or numbers has to be provided to operations Double check lead time with Operations for orders where quantity is over 300 units More information about this service here

Packaging for Power Products

Models	Important Information
	Flashbay is gradually replacing polybag packaging with Plant-based bags. Plant-based bags are made of Polyactic Acid (PLA). PLA is a “bio-plastic” and is derived from corn starch, unlike plastic which is derived from non-renewable petroleum. These bags are biodegradable, meaning that they will decompose quicker than regular plastic. Producing PLA uses 65% less energy than producing conventional plastics and generates 68% fewer greenhouse gases.
	This picture demonstrates the weight and volume difference of packaging between some Memory, Power and Audio product order.
Magnet Box (X-Large)/Presentation Tin Extra Large (PTXL) + Carabiner MBXL/PTXL + CB	The User Manual, micro USB cable and the Carabiner are all placed underneath the Power bank The Carabiner (CB) will not be attached to the Power bank
Magnet Box (X-Large)/Presentation Tin Extra Large (PTXL) + Neckstrap MBXL/PTXL + NS	The User Manual, micro USB cable and the Carabiner are all placed underneath the Power bank The Neckstrap (NS) will not be attached to the Power bank

Standard cardboard box - What fits in?	Important Information	How it looks like?
Standard cardboard box + Carabiner	The User Manual and the micro USB cable are placed in the cardboard box with the Power bank The Carabiner (CB) is packed into the cardboard box in a PE bag and is not attached to the Power bank	<link to website Standard packaging dimensions />
Standard cardboard box + Neckstrap	The User Manual and the micro USB cable are placed in the cardboard box with the Power bank The Neckstrap/ Printed Neckstrap (NS/PNS) is packed into the cardboard box in a PE bag and is not attached to the Power bank	<link to website dimensions />

Power Product awareness

Incline (IE) and Stand (SA) branding orientation

Models	Important Information	Additional information
||	Note: Incline (IE) and Stand (SA) can be used in two positions. Virtual Proof can be requested with vertical or horizontal position. Please pay attention and request the horizontal or vertical positioned proof according to customers needs.
	CR and TR comes with a micro USB, a 'lightning' adapter and a USB-C adapter The USB-C is default inside the card body and the 'lightning' will be loosely packed with the USB charging cable.
Card Power bank	Please see example picture on how the integrated adapter is positioned in the product and how it can be used with a phone Note: picture is an example and shows 'lightning adapter' whereas CR, TR and VT have inside the USB-C adapter as default.
	When customer orders Carabiner (CB) with Rex (RX) there will be a Key ring (KR) attached to the Power bank so that the Carabiner could fit. The Key ring (KR) shal not be added to the Sales order as Production will by default add it to Rex (RX) orders with Carabiner (CB).
	Every Power bank has the mandatory compliance marks displayed on them For some we use stickers for the compliance marks positioned as seen on this picture For some the compliance marks are printed on the bottom of the product	Mandatory compliance marks (point 5.1)
Torch Feature on Power Banks ‎	Most of our Power banks have an additional torch function (please check website). By holding the button (above and to the right of the light in the attached image) for three seconds, the torch light will be activated or switched off.

Power products Lead time guidelines

A lot of Power orders up to 2k units can be delivered within our standard lead times.
However it is important that you double-check lead times with Operations when any of the following conditions apply:

1. Order contains > 2,000 units
2. Order involves Screen printing of > 4 spot colours
3. Order includes Pantone-matched shells
4. Order includes more than 1 branding method e.g. SPR + ENL